Default Network Settings
LAN Connection Defaults
Item |
Default |
---|---|
Enable/Disable LAN |
Disable LAN |
Network name(SSID) |
BJNPSETUP |
Wi-Fi security |
Disable |
IP address (IPv4) |
Auto setup |
IP address (IPv6) |
Auto setup |
Set printer name* |
XXXXXXXXXXXX |
Enable/disable IPv6 |
Enable |
Enable/disable WSD |
Enable |
Timeout setting |
15 min. |
Enable/disable Bonjour |
Enable |
Service name |
Canon TS6300 series |
LPR protocol setting |
Enable |
RAW protocol |
Enable |
LLMNR |
Enable |
PictBridge communication (Enable/disable communication) |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Wireless Direct Defaults
Item |
Default |
---|---|
SSID/device name |
DIRECT-abXX-TS6300series *1 |
Password |
YYYYYYYYYY *2 |
Wi-Fi security |
WPA2-PSK (AES) |
Connection request confirmation |
Displayed |
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)
*2 The password is specified automatically when the printer is turned on for the first time.